-
It would be good if this connection would allow the "Right" or "Left" option when the sleeve is selected. Perhaps the reason it is not an option at this time is that there would need to be a means of connecting the sleeve if there was an offset. A "T", angle, or plate option would take care of connecting the sleeve. I would like to see this implemented.
Another option that is very needful for handrail connections is to allow the "angle welded" or "angle bolted" connection for the offset handrail posts to not be centered on the handrail posts. Sometimes, these angles need to weld to the "side" of the posts instead of butting into the face of the post. This is necessary because sometimes the handrail needs to be offset an exact distance from the toe of the beam or channel it's mounting to and there are no angle sizes to match that exact requirement. On several platforms I've done, I have to manually add the connection angles. The angles are welded to the side of the posts instead of welding to the center of the posts.
-
I found the source of my trouble. After replacing the current 2010 ASTemplate.dwt file with the original backed up copy of the 2010 ASTemplate.dwt file, there was no more conflict. I can now use either AS 2010 or AS 2011.
-
I am having the same problem. I have AS2011 up and running fairly well but need to go back to AS2010 to add stairs. I do not wish to move everything to AS2011 but am having trouble opening up AS2010. This is actually a very serious problem when work needs to be done....
-
I tried to add "Anchors" and "Anchors on site" to the Material List Summary but could not find either of these descriptions under "Report Contents" when right clicking on the template. Where am I missing them?
-
I found out that all of the drawings I created on a project need to be renumbered twenty pages higher. All of the single parts and main parts need to be renumbered twenty higher as well. In other words, a single part that is numbered 1pa now needs to change to 31pa. A beam numbered 3B1 now needs to be 33B1.
What is the easiest way of renumbering the drawings and piece marks without redetailing everything? I have about 21 pages of details and 11 erection drawings to contend with.
Thanks for the help!