-
ITS 2012--ANY IDEA WHEN AS2012 WILL GET HERE?
-
DXF on a folded beam
Excellent. Will this be included in service pack 3 by any chance? -
checker plate treads
How can I show on my material list (external and on drawing) that my treads are supposed to be made from checker or diamond plate material? -
DXF on a folded beam
Please see picture attached. It is dxf of a folded beam I created using folded beam tool.
As you can see there are quite a few contours in it some rectangle some circle.
For some reason some contours only show on one half and some on the other half.
Why are there two halves when it is a piece of 1/4" plate?
Why do some contours show up on one side and not the other?
I have tried the same beam using folded plate instead of folded beam and it worked perfectly.
However I cannot use folded plate in my designs. It has to be folded beam.
Attachment: bomdxf.gif
-
advance trim/extend
This tool works fine when selecting each part, to trim or extend ,individually. I am curious to see if using a window selection works for anyone else. It does not for me.
Weirdly I can select one part with a window selection and it will work, but selecting two or more and it doesnt work.
Anyone?
-
Bent/Trim Hand Railing *FIX*
Great news thank you -
Adding a view to MP stair at UCS
I want to add a top view of a stair to the MP stair at ucs process.
I have it to where the top view shows up but it is always parallel
to the stringer. Is there a way I can make a
"View from positive UCS y-orientation on the zy plane?
So my detail is parallel to the ucs instead of the stringer.Screenshot of my dsm attached
Attachment: DSM-as-2011.gif
-
Bent/Trim Hand Railing *FIX*
Please fix this tool. See picture attached.
There is something wrong with this tool. It is not working as it did in previous releases.
In the picture you can see that the small pipe after the bend is getting contoured on the wrong side.
Try it and you will see pipe size is 1 1/2X5/65 aisc hss pipe
Bend radius is 3 1/16"
Please fix this as the workaround is extremely time consuming. Contact me if you need more info.
Attachment: aspipe_0.gif
-
Problems when numbering the model.
This happens to me also. I usually just delete the single part maks then do a renumbering.
So toggle to single parts and then use "delete part numbers tool". Then renumber.
-
DSM-restoring defaults
yes no maybe?