-
Symbol position updated with drawing update
Well draw any model element, column for example. Then create plan view with automatic symbols for framework. Then just move a little bit that framework symbol, and then update that drawing. Symbol will return on its original location...
-
Automatic symbol for hidden element
You are talking about Advance Concrete and Advance Manager?
As far as I know those options are for Advance Steel. Defaults option is gray (inactive) on my Advance Manager.
-
Automatic symbol for hidden element
Is it possible not to show symbols for hidden elements with creation of drawing and drawing update?Attachment: advance3.jpg
-
Symbol position updated with drawing update
Is it possible NOT to update symbol position when I update drawing.
It takes a lot of time, unnecessary, to set symbol positions that overlap each other, or structure.Attachment: advance2.jpg
-
Display only bottom or top zone of fabrics in "Top reinforcement view"
Is it possible to display only bottom or top zone of fabrics in "Top reinforcement view"?
Same question as asked in:
http://www.graitec.com/en/forum_post.asp?software=1&category=21&topic=997
But there is no option "Hide on drawings" and "Display hidden reinforcement" for fabrics unfortunately...Attachment: Screenshot-2012-09-14_10.29.42.png
-
Linear distribution in new reinforcement view
Well I used:
( round ( ElementDistances * 0.4 ) / 0.4 )
in custom symbol to round distances to 2.5cm, but it can not work when there are more then one distance, for example "/25/12.5"
-
Linear distribution in new reinforcement view
I found the problem... Custom symbols should not be set to round number - field Element Distances...
-
Linear distribution in new reinforcement view
When we create linear distribution, lets say frames in beam, and then create new reinforcement cut (section) of that beam, field <ElementDistances> for frame bar on that section always reads 0.
On the other hand, field <ElementDistances> works perfectly on sections of beam that are automatically created with "Create a reinforcement drawing starting from structural elements".
Is there any explanation for this.
-
Slab reinforced with bar field
Thank you... This with "Hide on drawings" and "Display hidden reinforcement" has been helpful. -
Slab reinforced with bar field
Yes i have tried that...
If I have a hook on, lets say bottom zone of reinforcement, and if hook goes up to the top zone, cut always include that hook, so it shows bottom zone also with top.
Or even worse if both zones of reinforcement have hooks...
Is there any other way?