Advance Concrete provides the option to renumber the reinforcement bars for more than one view or even for the entire project.
Due to the changes that appear during the detailing of a project, the numbering is applied several times before finalizing the drawings.
The numbering is done by accessing the "Renumbering" command on the "Reinforcement" ribbon.
The same tree from the Pilot is present in the "Renumbering" window.
The "Reset all marks" option is set as default. Each reinforcement element will receive a mark and the ones that are identical will get the same mark. For a numbering on several drawings select the views in the "renumbering" window.
The bars from the drawings selected in the tree will be compared and the identical bars will receive the same mark. The selection of all the drawings in a project is done with the "Select all" option.
For projects made with the "Split" option active, the drawings that are opened for "renumbering" will be closed. Right after the numbering is finished Advance Concrete will save and close all the drawings that were automatically opened.
The numbering process will compare all the characteristics (geometry, diameter, steel grade) and will give the same mark to identical characteristics even if they do not belong to the same drawing.
This feature is available both in projects that use external DWG files for the views and in the ones that use a single DWG for the entire project.