Simply copy the elements from you project into a new dwg file; set the model role of the pieces to "none" and define the required piece mark.
Select the standard part template in the Numbering dialog box and check "Single Part".
This standard part template will then be considered during the numbering in this project.
The standard part template can be reused for any other project or new standard part templates can be created if necessary.
Post numbering solution
Counter
The counter can be modified in:
AstorBase.mdb - > IncrementalCounter
Key | Token | Start | Init | Range | CharsToBeExcluded | Counter | OwnerText |
0 | CounterStrLC | a | a | 28 | -1 |
Token: | Can be any name |
Start: | Defines the start value for the counter (nothing would mean that the second piece starts with "a") |
Init: | Initialized value should be the same as for the Start value |
Range: | Defines how many characters are used (alphabet has 28) |
CharsToBeEx: | Defines the excluded characters, for example, if you don't want to use e, i, u, etc. |
Counter: | Internal value has to be always "-1" |
OwnerText: | Defines the Author and is necessary for merging into future Versions of Advance Steel |
Key | RunName | PerElement Settings | Detailing Behaviour | MainSPPrefix Template | MainSPPrefix Template ForAll | MainSP Template | MainSP Template ForAll |
0 | None | 0 | 0 | %PreSPPrefix | 0 | %PreSPNr | 0 |
1 | SP Number (for main part) = Assembly Number | 1 | 0 | %PreMPPrefix | 0 | %PreMPNr | 0 |
2 | SP Number (for standalone part) = Assembly Number | 2 | 0 | %PreMPPrefix | 0 | %PreMPNr | 0 |
3 | Assembly Group | 1 | 1 | %PreMPPrefix | 0 | %PreMPNr | 0 |
SPPrefix Template | SPPrefix |
SPTemplate | SPTemplate ForAll | MPPrefix Template | MPPrefix Template ForAll | MPTemplate | MPTemplate ForAll |
%PreSPPrefix | 0 | %PreSPNr | 0 | %PreMPPrefix | 0 | %PreMPNr | 0 |
%PreSPPrefix | 0 | %PreSPNr | 0 | %PreMPPrefix | 0 | %PreMPNr | 0 |
%PreSPPrefix | 0 | %PreSPNr | 0 | %PreMPPrefix | 0 | %PreMPNr | 0 |
%PreSPPrefix | 0 | ~CounterStrLC-%PreMPNr | 0 | %PreMPPrefix | 0 | %PreMPNr | 0 |
Key: | Has to be unique |
RunName: | Anything possible |
PerElementSettings: | 0 nothing special |
DetailingBehavior: | 1 for the influence on the drawing name |
MainSPPrefixTemplate: | Defines the prefix for the single part number of the main assembly piece |
MainSPPrefixTemplateForAll: | 0 in most cases, only new and modified pieces will be renumbered |
MainSPTemplate: | Defines the single part number of the main assembly piece |
MainSPTemplateForAll: | -- see above - |
SPPrefixTemplate: | Defines the prefix for the single part numbers that are not the main assembly |
SPPrefixTemplateForAll: | -- see above - |
SPTemplate: | Defines the single part numbers that are not the main assembly |
SPTemplateForAll: | -- see above - |
MPTemplate: | Defines the assembly number |
MPTemplateForAll: | -- see above - |
GRAITEC GROUP 2018 | WE'VE UPDATED OUR PRIVACY NOTICE - Click here to find out more about how we collect, store and handle your personal data and your rights.