I have a column with a plate welded to the top and a base plate at the bottom. The column is viewed from the front and there is a top view and a bottom view which are both called Endplate Right 1/8=1CO. When I check the views by double clicking the green frame and looking at the preview while selecting the different views I see 2 Endplate views,Endplate from right 1/8 = 1 CO - 1 & Endplate from right 1/8 = 1CO - 2. I'm guessing that those are the 2 views in the drawing. But when I try to change those views so that they are looking from the correct direction in the Drawing Style Manager I only find 1 Endplate from the right 1/8 = 1CO.What I want is to see the column shown with hidden lines when looking at the top of the column so that the shop can see that the column is under the plate. And I want to see the column with solid lines when looking at the base plate to show that the column is on top of the base plate and not under. What happens when I change the view direction for Endplates from the right 1/8 = 1CO one of the views is correct and the other is wrong. How do I get both views to show correctly in the detail drawing?Thank you.