Stair Treads

I NEED HELP ADDING STANDARD USA GRATING TREADS FOR STRAIGHT STAIRS TO ADVANCE STEEL 2016.THIS IS A WIDELY USED PRODUCT AND IT SHOULD BE A STANDARD TREAD SELECTION NOT A CUSTOM ONE.THESE TREADS ARE MANUFACTURED BY MCNICHOLS , IKG HARSCO, OHIO GRATING AND OTHERS.I ALSO NEED HELP ADDING 3/8 BOLTS TO THE SELECTION TO ATTACH THE TREADS TO THE STRINGERS.THIS TREAD IS MADE FROM 19W4 WELDED GRATING WITH A BENT CKR PLATE NOSING, IT HAS 3/16 X 2½ CARRIER PLATES.I TRIED ADDING THEM TO THE MACRO AS SHOWN IN THE HELP FILE BUT THE INSTRUCTIONS ARE INCOMPLETE.Thanks I NEED HELP ADDING STANDARD USA GRATING TREADS FOR STRAIGHT STAIRS TO ADVANCE STEEL 2016.THIS IS A WIDELY USED PRODUCT AND IT SHOULD BE A STANDARD TREAD SELECTION NOT A CUSTOM ONE.THESE TREADS ARE MANUFACTURED BY MCNICHOLS , IKG HARSCO, OHIO GRATING AND OTHERS.I ALSO NEED HELP ADDING 3/8 BOLTS TO THE SELECTION TO ATTACH THE TREADS TO THE STRINGERS.THIS TREAD IS MADE FROM 19W4 WELDED GRATING WITH A BENT CKR PLATE NOSING, IT HAS 3/16 X 2½ CARRIER PLATES.I TRIED ADDING THEM TO THE MACRO AS SHOWN IN THE HELP FILE BUT THE INSTRUCTIONS ARE INCOMPLETE.

Attachment: IKG Harsco Treads.pdf

Hello Chris,To import A307 bolt using the Advance Steel Management Tool (ASMT)1. You will need to call your Graitec support agent and have them email you a zip file of the A307 bolt.2. Once you receive the zip file, save it to an appropriate location and extract it. You will see the format.3. Open your Advance Steel Management Tools (ASMT).4. Select the Bolts category. After selecting the expansion arrow to the right, select the A307 from the list. You need to import the bolt. 5. Select the icon at the upper left “Import bolts” icon. 6. Navigate to where the A307 bolt was extracted select it and hit Apply.7. Navigate to the A307.mdb file and select hit Apply and from 8. Select the Defaults Category then hit Load settings in Advance. I hope this helps,Best Regards,Janet

Dear Chris,I have attached a step by step for your convenience.Best Regards, Janet

Attachment: BOLT-How to add a A307 bolt using the ASMT_0.pdf