Assembly mark renumbering (Advance Steel 2015)

Is there a way to renumber the assemblies? The numbers were generated and part of the model was deleted as it was removed from the contract. But now I have assembly marks that are all over the place.

Hi Cruz,

I would like you to send your model along with the drawings to Support.americas@graitec.com so I can help you resolve the issue. What numbering process are  you using? Did you renumber or just did a forse update when the changes were made. 

Best Regards,

Janet

I am doing a force update when the changes are made. I should have read what I wrote. Originally I had 2 buildings on the same model and one of those buildings was removed from my contract. So I deleted that building and did a force update and when the numbers were regenerated, the part numbers do not match the sheet numbers as you will see in the sample I sent.

Thanks,

Cruz

Hi Cruz,

Thanks for sending your model and drawings to: support.americas@graitec.com.

 You have to change the token from DRAWING_NO to POS_NUM in the HYPERSTEELPAGEHEADER in order to have the Drawing No. the same as the part number.

You had also mentioned that you wanted to remove the lower case letter from your part number to do this, you have to remove the lower case letter by changeing your Process Method from With Drawing Number.

See attached file for print screens.

Best Regards,

Janet

Attachment: [file not found]